How to make silver snapshots 2

How to make silver snapshots

Get the boring, monochrome color of your hair with a few silver moments. Labeling is a two-step process that involves whitening and tightening, but leaves your hair with a unique and funny look. Go to your local cosmetics store and get your tools and products for less than $ 20 for this adventure. Not only do you save money and time when you go to a salon, you have the complete freedom to make as many or as few pieces as you want.

How to make silver snapshots 3

Treat yourself to silverware at home.

Step 1

Mix the contents of a whitening set with gloves according to the instructions in the leaflets. When dyeing your hair, use an old towel and clothes.

Step 2

Use a rat tail comb to cut a piece of hair about 1/2 to 1 inch thick and put a strip underneath. Start from the back. Maybe you need a friend to help you with that.

Step 3

Press the bleach on the cut side of the hair and press it completely. Start 1/2 inch from the scalp and coat to the ends. Fold the film strip in half and then in the middle to secure it to the head. Repeat the procedure with the rest of the hair on the top layer and allow 2 to 3 cm between the strands.

Step 4

Allow the bleach to remain for 45 minutes, depending on how dark your hair is. Fold an aluminum strip to control the desired brightness. Hair should be light yellow. Once the hair has reached this color, gently remove all the slides without pulling on shampoo. Towel dry and comb your hair out.

Step 5

Mix 1.5 ounces of a silver toner with 3 ounces of 20 volume developer in a plastic bottle. The toner should have a blue or purple base to neutralize the yellow or bronze tones of the bleach and to dye the silver hair.

Step 6

Apply toner to wet hair with a new pair of gloves only on bleached yarn. If it is the rest of the hair that has not been dyed, it will not affect it because the toner does not increase color, but it fits.

Step 7

Leave the toner for 10 to 15 minutes. Even more, the toner starts to get dirty. Rinse with warm water in cold water and apply emollient. Leave the air conditioner on for 10 minutes and rinse it off.